162 2nd Avenue, Brooklyn, NY 11215
(718) 788-6800
Mon–Thu 7am–5pm · Fri 7am–2pm · Sat–Sun closed
330 Pine Street, Bridgeport, CT 06605
(203) 900-0005
Mon–Thu 7am–5pm · Fri 7am–2pm · Sat–Sun closed
MSRP$2,395.00Public priceCONTRACTORLog in to see price ›
In Stock
Complete Huntsman Heatlok HFO High Lift closed-cell spray foam system. Includes the A-Side (Huntsman ISO – 520) and B-Side (Heatlok HFO High Lift resin), sold together as one set.
The Huntsman Heatlok HFO High Lift Closed-Cell Set is a complete Huntsman Building Solutions Heatlok HFO High Lift closed-cell spray foam system: the A-Side (Huntsman ISO) and the B-Side (Heatlok HFO High Lift resin), matched and sold together. It is an HFO-blown, low-GWP closed-cell foam that insulates and works as an air barrier, vapor retarder and water-resistive barrier, above and below grade. Full specs for each side are in the A-Side and B-Side tabs.
Review both safety data sheets before handling. The A-Side contains MDI isocyanate and can cause respiratory and skin sensitization: use a supplied-air respirator when spraying, chemical goggles, chemical-resistant gloves and full skin coverage. Foam must be separated from the interior by an approved thermal barrier.
Questions about rig setup or coverage? Contact us and our team will help you dial in your system before you order. The Spray Market supplies spray foam contractors with equipment, replacement parts, chemicals and safety gear.
The Huntsman ISO is the A-Side (isocyanate) component used with Huntsman Building Solutions spray foam systems (A-PMDI isocyanate, sold by Huntsman as Rubinate M / Suprasec 5005).
The Huntsman Heatlok HFO High Lift resin is the B-Side component of the system. Its chemistry sets the finished foam: closed-cell, HFO blown, built for thick passes.
| Peso | 2 lbs |
|---|---|
| Dimensiones | 10 × 8 × 6 in |
| Brand | Huntsman |
| Sold As | Set (A-Side + B-Side) |
| Foam Type | Closed-Cell |
| Blowing Agent | HFO |
| Core Density | 2.0 lb/ft³ |
| Includes | Huntsman ISO – 520 A-Side, Heatlok HFO High Lift B-Side resin |
| A-Side SKU | 59579 |
| A-Side Chemistry | Polymeric MDI (pMDI) |
| A-Side Viscosity | 180-220 cps @ 77°F |
| A-Side Specific Gravity | 1.24 |
| B-Side SKU | 57622 |
| R-Value | 6.3 per inch (aged) |
| Mix Ratio | 1:1 by volume |
| Fire Rating | ASTM E84 Class I |
| Compressive Strength | 34.8 psi |
| Closed-Cell Content | 91% |
| Spray Pressure | 1,200-1,400 psi |
| Process Temperature | 92-115°F |
Manufacturer documentation for this part and the equipment it fits. Always follow the manufacturer instructions and Safety Data Sheet before use.
Valoraciones
No hay valoraciones aún.