162 2nd Avenue, Brooklyn, NY 11215
(718) 788-6800
Mon–Thu 7am–5pm · Fri 7am–2pm · Sat–Sun closed
330 Pine Street, Bridgeport, CT 06605
(203) 900-0005
Mon–Thu 7am–5pm · Fri 7am–2pm · Sat–Sun closed
MSRP$2,395.00Public priceCONTRACTORLog in to see price ›
In Stock
Complete AMBIT AMBI-TITE 204 HFO closed-cell spray foam system. Includes the A-Side (AMBIT PMDI-ISO) and B-Side (AMBI-TITE 204 HFO resin), sold together as one set.
The Ambit AMBI-TITE 204 HFO Closed-Cell Set is a complete AMBIT Polyurethane AMBI-TITE 204 HFO closed-cell spray foam system: the A-Side (AMBIT PMDI-ISO) and the B-Side (AMBI-TITE 204 HFO resin), matched and sold together. It insulates and air-seals in one step in residential and commercial walls, floors, ceilings, attics and crawl spaces. Full specs for each side are in the A-Side and B-Side tabs.
Review both safety data sheets before handling. The A-Side contains MDI isocyanate and can cause respiratory and skin sensitization: use a supplied-air respirator when spraying, chemical goggles, chemical-resistant gloves and full skin coverage. Foam must be separated from the interior by an approved thermal barrier.
Questions about rig setup or coverage? Contact us and our team will help you dial in your system before you order. The Spray Market supplies spray foam contractors with equipment, replacement parts, chemicals and safety gear.
The AMBIT PMDI-ISO is the A-Side (isocyanate) component of AMBIT spray foam systems.
The AMBIT AMBI-TITE 204 HFO resin is the B-Side component of the system. Its chemistry sets the finished foam: closed-cell, HFO blown.
| Peso | 2 lbs |
|---|---|
| Dimensiones | 10 × 8 × 6 in |
| Brand | Ambit Polyurethane |
| Sold As | Set (A-Side + B-Side) |
| Foam Type | Closed-Cell |
| Blowing Agent | HFO |
| Core Density | 2.0 lb/ft³ |
| Includes | AMBIT PMDI-ISO A-Side, AMBI-TITE 204 HFO B-Side resin |
| A-Side SKU | 59586 |
| A-Side Chemistry | Polymeric MDI (pMDI) |
| A-Side Viscosity | 200 ± 50 mPa·s |
| A-Side Specific Gravity | 1.25 |
| B-Side SKU | 59572 |
| R-Value | 6.8 @ 1" (initial) |
| Mix Ratio | 1:1 by volume |
| Fire Rating | ASTM E84 Class 1 |
| Compressive Strength | >20 psi |
| Spray Pressure | 900-1,200 psi |
| Process Temperature | 108-130°F |
Manufacturer documentation for this part and the equipment it fits. Always follow the manufacturer instructions and Safety Data Sheet before use.
Valoraciones
No hay valoraciones aún.